PanelDue extrude Speed options

[ozgiac]

Using a Duet with 2.85mm filament, i find the extrude speed of 2mm per sec to fast.

Any chance of making the speeds pre-settable?

speeds of 50mm, 20mm are useless for most extruder setups.

Thanks in advance.

[Stephen6309]

@ozgiac Those speeds are handy in loading filament with a bowden.

[ozgiac]

Ok granted for Bowdens.

But i am using a bondtech QR extruder and at 2mm is to fast and the the stepper is skipping

[dc42]

Would 1mm/sec be an appropriate speed?

[ozgiac]

That would be great.