ATX Power off at 45° at the Heatend
-
Hy at all,
how can I switch ATX power off when the Hotend is under 45°C, because the Fan from the Coldend need ATX-Power and I dont want to damage my Printhead!
If my print is finish I have to wait bevore the system shut down with ATX-Power off. Any Idea? -
https://duet3d.dozuki.com/Wiki/Gcode#Section_M81_ATX_Power_Off
If you give the S1 parameter to M81 it'll wait until the fans turn off before shutting the ATX power off.
-
Thank you for this information!
Do you mean i have to write into the End-sequence for my progamms (Slicer Cura) M81 S1 to shut off the ATX-Power?
-
@sw Yep. That should do it.
-
Oh yes, I thank You very much and check it now ...
