Unable to display duet web interface
-
Unable to display duet web interface. I follow the instructions exactly. Duet says it's connected to my router but I can't see it in the router settings.
Thank you for your help -
just enter the IP address directly, it works much better this way.
-
I just tried that last time, I give the screen.
-
did you copy the DWC files to your sd card /www folder?
-
I'm not sure the dwc file says nothing. I followed the instructions and there is nothing about copying DWC is nothing. Are there instructions somewhere? Do you have firmware on your sd card?
-
-
@tom732 said in Unable to display duet web interface:
I'm not sure the dwc file says nothing. I followed the instructions and there is nothing about copying DWC is nothing. Are there instructions somewhere? Do you have firmware on your sd card?
That message means that the firmware didn't find the web files in the /www folder of the SD card. if it's a genuine UK-manufactured Duet then all the files should already be present on the SD card. See https://duet3d.dozuki.com/Wiki/Firmware_Overview#Section_SD_card_structure.
-
if that was still unclear and you somehow formatted your card, just grab the zip file from https://github.com/T3P3/Duet/tree/master/Duet2/SD Card Contents
Extract the /www directory from the zip file to your sd card /
-
Thank you for your help, the board is clone and I did not load the DWC on the card along with the weak receiving signal of the ESP module I immediately lost the signal. It helped put the board closer to the router.
