Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet2 V1.03 current draw over USB

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    3
    3
    223
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jv43undefined
      jv43
      last edited by

      I'm planning on using a RPi as a dedicated "workstation" for my printer and misc. other stuff.
      To have some redundancy in case of a network failure im planning to connect the pi to my duet over USB.
      As the Pi will most likely be on a seperate circuit from the main printer PSU, the monitor, lights, etc. the Duet will stay on, receiving power over USB from the pi.

      First, are there any disadvantages to or concerns regarding this?
      Second, how much power does the Duet2 V1.03 draw when powered only over USB, with no Power on VIN?

      Asking this to size my PSU for the pi appropriately.

      Thanks for the help guys

      1 Reply Last reply Reply Quote 0
      • aidarundefined
        aidar
        last edited by

        I guess the answer is here: https://duet3d.dozuki.com/Wiki/Hardware_Overview#Section_Electronics_power_consumption

        1 Reply Last reply Reply Quote 0
        • A Former User?
          A Former User
          last edited by

          You may want to check if you have any 5V accessories and if there is a diode between it and 5V from USB as it may cause a voltage drop that may cause issues.

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA