Duet Ethernet config running on a Duet Maestro

  • Hey,

    A community member was kind enough to provide his Duet Ethernet files that he used with his setup but unfortunately, I have a Maestro. Would I need to adjust many of the files found in the sys directory to get it running on the Maestro such as pin assignments etc? I recognize that certain features like stall detection that he might have enabled will not work for the Maestro.


  • max current for the stepper is lower.
    the resistor for thermistors is 2200 instead of 4700 (just delete the R part completly)
    the maestro supports stealthchop2, so you might want to tune those settings.

  • Thanks for the insights!

Log in to reply