Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    dwc broken after 2.02 upgrade

    Duet Web Control
    2
    2
    234
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Sir printsalot
      Sir printsalot last edited by

      Can't connect after 2.02 firmware upgrade through dwc. no theres no usb communication despite the win driver being install. dwc opens but won't connect with no error. just says connecting forever. I pulled sd card and checked config.g for network info. It's correct. router shows it's online. lights all look good. what now?
      it's ethernet.

      1 Reply Last reply Reply Quote 0
      • Phaedrux
        Phaedrux Moderator last edited by

        Does the Duet show up in the Device Manager when connected?

        Which lights are lit up when it's connected to USB?

        You may be able to go through the fall back procedures to get back up and running. https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Fallback_procedure_Num_1

        If you follow through on those, at what point does it fail?

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA