Help with Precision Piezo Orion kit on a tevo black widow.

[PeterA]

Hi guys, so I'm very excited to get my piezo kit. (still waiting) The only thing I'm not sure of is the g-code for getting it to work and setting it up. I have the Duet Wireless board and the touch screen interface on my tevo black widow. Any suggestions as too what to do for the g code. Thanks.

[dc42]

This is what I have read:

M558 P5 I1 R0.4 F300 X0 Y0 Z0
G31 X0 Y0 Z-0.1 P500

I am not sure about the F300, it looks rather low to me. F1200 might be better.

Test and calibrate it as described at https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe.

[PeterA]

Thanks for such a quick response. I will give it a bash (probably not a good word choice) as soon as it arrives.

[PeterA]

Can I use the standard z probe sensor cable to connect my piezo to, or do I need to connect it to a different part of the board?

[dc42]

@petera said in Help with Precision Piezo Orion kit on a tevo black widow.:

Can I use the standard z probe sensor cable to connect my piezo to, or do I need to connect it to a different part of the board?

Connect it to the Z probe connector.

[PeterA]

@dc42 Thanks a million, I will do