Speed factor detent....



  • Hi,

    when i print.... i use too much speed factor.... why.

    At the start of print, i lower speed factor to 20%, aprox... and i adjust first layer height with DWC...., when i reach the height seems correct, to me, i change the speed factor to 100%... and here its the small issue, its dificult let this slider in 100%, ... 98%...101%...., and soo on.

    I know this not have importace, small difference between 99% and 101%.... but an idea for DWC, its there is a detent in 100%...


Log in to reply