Correct setup in config.g of fans
-
Hi,
For some time now I have not printed PLA, and now I have to print some pieces .... but I'm having problems with the layer fans, and they do not turn on, I have to turn them on by the DWC, manually.
I guess it will be something of the configuration and the assignment of these fans to the extruder.
I put part of the "config.g", which corresponds to the fans. I have:
; FAN DEFINITIONS M106 P0 S0 H-1 ; Layer A M106 P1 S0 H-1 ; Layer B M106 P2 S1 I0 T80 H1 ; Heatskin
And the assignament to the tool, think here is the problem...
; Tools M563 P0 S"E3D V6" D1 H1 F2 ;tool(P)0 Nombre(S) Motor de extrusion(D)1 Calentador(H)1 y Ventilador(F)1 G10 P0 X0 Y0 Z0 ; Set tool 0 axis offsets G10 P0 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C
How can assign all fans to P0 tool? Maybe--
M563 P0 S"E3D V6" D1 H1 F0:1:2; All three fans to tool P0
or
M563 P0 S"E3D V6" D1 H1 F0:2; All three fans to tool P0
or
M563 P0 S"E3D V6" D1 H1 F0:1; Only fan 0 and fan 1 to tool, fan 2 no, its heatsking
-
@peirof said in Correct setup in config.g of fans:
or
M563 P0 S"E3D V6" D1 H1 F0:1; Only fan 0 and fan 1 to tool, fan 2 no, its heatskingThat one.
-
Thanks,
later try....
As fast as ever......