Option to only show mapped axis?

[timothyz]

Hi,
I have an application that I am using a duet for which is not an xyz machine and really only has an x axis.

Is there any way for me to hide the Y and Z axis options on the main page? I assumed when I un-mapped them they would disappear, but they remain.

Thanks
Tim

[deckingman]

@timothyz You could try adding P1 to the M584 command https://duet3d.dozuki.com/Wiki/Gcode#Section_M584_Set_drive_mapping

It certainly works with more than 3 axes but I've never tried it with 3 or less.