Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    M591 what does it really do?

    Duet Hardware and wiring
    2
    2
    124
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Hornetrider
      Hornetrider last edited by

      Hi
      I am using a standard filament run out switch and have activated it in the config.g with M591.
      The good thing, the Duet reacts and shows the run out message.
      But it seems that the code in Pause.g is kind of ignored. It runs but display messages M291 with S3 (OK, Cancel) are ignored and the printer starts to run independent of any action from user.
      Additionally the buttons "Pause" and "Resume" are then missing on PanelDue.

      Filament-change.g is empty, and also tested it with renaming the file...no change.

      Duet (2.03) and Panel are on latest released FW.

      What does M591 really do on trigger and what are the priorities?

      Just a hint, while printing the "Pause" button (Panel and DWC) action does what it should do according to macro.

      I hoe someone has a quick idea on how to solve this...

      Cheers

      1 Reply Last reply Reply Quote 0
      • nhof
        nhof last edited by

        I'm not sure all the priorities, etc. but if the macro file is empty surely it shouldn't pause? Try throwing a M25 in the Filament-change.g file to see if it pauses properly when the sensor is triggered.

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA