Bug - DWC Not updating file info



  • If you upload a file with, for example 0.2mm layer height and then upload a file of the same name with 0.1 layer height, DWC does not update the information shown about the model.
    It will still show the layer height as being 0.2mm. The print time is also not updated.

    I am running firmware 2.04 and DWC 2.0.4


  • administrators

    @jay_s_uk said in Bug - DWC Not updating file info:

    If you upload a file with, for example 0.2mm layer height and then upload a file of the same name with 0.1 layer height, DWC does not update the information shown about the model.
    It will still show the layer height as being 0.2mm. The print time is also not updated.

    I am running firmware 2.04 and DWC 2.0.4

    Does it update if you click the Refresh button?



  • @dc42 no, this was with pressing the refresh button.
    I sort by modified date so I had refreshed the page to get the file moved to the top of the page.


Log in to reply