Simple linear rail cube 3D printer with Duet 2 Wifi

[Czech_Improvementer]

I have just published my new project: “Simple linear rail cube 3D printer with Duet 2 Wifi” on Thingivers.com.
I wanted to create a cube 3d printer with a drive other than Corexy or H-bot. I know these printers are, but mostly with two stepper motors and a linear rail supported aluminum profile. With MGN9 I got with the whole x-axis below 500g. I work well with 0.9 stepper motors
I would appreciate if you could click on the link and tell me what you think about it, especially with regard to the crossing of axes and the resulting problems. Excuse my English is not my native language.
Link to my project: https://www.thingiverse.com/thing:3953873
Thank you.