ATX Power in FW 2.05 RC (latest) is broken
-
With FW 2.05 RC (latest) the M80 command in DWC does Not Work and makes DWC hang Up. I tried enabling the 24V on the Main Page (click the Button "ATX Power in") as Well as a gcode command (m80). The Power does Not get enabled and the GUI stops responding to any new Commands and loops forever. Only a hard reset makes Controlling the printer possible again.
-
are you on DWC version 2 or 1.22.6?
and why are you starting a new thread when you reported it to the FW thread?
-
@wildblue said in ATX Power in FW 2.05 RC (latest) is broken:
Only a hard reset makes Controlling the printer possible again.
Reloading DWC2 by pressing F5 works too.
-
DWC 2. Reloading the Page does Not enable the ATX Power supply nor fixes this Bug.
I have reported some more issued in my First Post and got the clear Message from Ian to separate the issues in new Threads. This is what i have done.
