Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Solved Anyone had any experience with CS Labs controllers?

    Other control boards
    2
    3
    116
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • PaulHew
      PaulHew last edited by

      Long shot, but I need some assistance.
      I have a friend who has a Plasma cutter that is controlled by a CS Labs controller.
      Spoke to swift cut and they basically said, 'The IP Address cannot be changed, it is written in the firmware'
      Being a person who builds networks for a living I find this not true, everything that connects to an Ethernet network must be able to have its address changed!

      Anyway, if anyone knows how to change the IP Address in the controller for a CS-Labs controller, I would appreciate the help!

      Regards,

      Paul.

      RailCore II - Duet Mini + 1LC, Voron V0.1 - Duet Mini
      Voron 2.4 disassembled..... Waiting for the RailCore Mini....

      1 Reply Last reply Reply Quote 0
      • Dougal1957
        Dougal1957 last edited by

        have a look at link it may be the wrong controller but Pg 26 says it is assigned by DHCP makes 3 attempts and then defaults to 10.1.1.2 (takes 10 secs apparently.)

        PaulHew 1 Reply Last reply Reply Quote 0
        • PaulHew
          PaulHew @Dougal1957 last edited by

          @Dougal1957 said in Anyone had any experience with CS Labs controllers?:

          have a look at link it may be the wrong controller but Pg 26 says it is assigned by DHCP makes 3 attempts and then defaults to 10.1.1.2 (takes 10 secs apparently.)

          Thanks for the info, greatly appreciated. I will give it a try on Monday when I have found out how to tweak the Mach4 software to take a new IP address.

          Again, thank you.

          P.

          RailCore II - Duet Mini + 1LC, Voron V0.1 - Duet Mini
          Voron 2.4 disassembled..... Waiting for the RailCore Mini....

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA