Question about delta calibration

fcwilt

Hi,

In the documentation on calibrating a delta and updating config.g with the update values there are these statements:

"If the calibration errors are small, a single execution of bed.g will calibrate your printer accurately."

"5. If you are happy that the calibration is close to correct when you power up"

Question: When are calibration errors considered to be "small"

Question: How do I know if I am happy with the results?

Thanks.

Frederick

dc42

I've just updated that page, and I hope it's clearer now.

fcwilt

Thank you very much.

I am rebuilding my printer and now I know what to look for.

If I don't get good results I don't what what to do (yet) but I assume there are steps to follow.

Frederick

dc42

fcwilt

Have you read https://duet3d.com/wiki/Calibrating_a_delta_printer ?

Hi,

No I had not found that section - it appears to answer all of my questions.

Got to hand it to you all - you have some first rate documentation - one of the reasons I am rebuilding all of my printers with DuetWifi boards.

Thanks much.

Frederick