Duet Web Control 2.0.4 - ATX Power Control Missing
-
Re: ATX Power button- where did it go?
I am new to the Duet2 board. I was previously using octoprint with a relay for external PSU control. I have installed my Duet board to use the same relay and all works fine via the M80 and M81 command line control but for the life of me I can't find the option to enable the GUI button in the new 2.0.4 DWC unless I hit the "revert to DWC1" button.
Once i enter the M80 command the ATX power interface appears. How do I make it persistent?
-
2.0.7 is out now. See if it's made a return.
-
@mitch said in Duet Web Control 2.0.4 - ATX Power Control Missing:
Once i enter the M80 command the ATX power interface appears. How do I make it persistent?
As far as I recall, DWC was modified some time ago to only show the ATX power interface if it detects a reference to that functionality in Gcode. So, if you put M81 somewhere in your config.g, the ATX display should return.
-
@infiniteloop that did it. Thanks.
-
M80 in config.g to default ON, and the DWC ATX button,
or
M81 in config.g to default OFF and the DWC ATX button.
