Mesh Bed Compensation Not Working



  • I recently updated to Firmware 3.0 and swapped by bed out on the railcore. Everything is working properly except for mesh bed compensation. I have running a 4 point leveling and mesh compensation. Bed is slightly tilted in one spot which used to be able to be corrected by enabling mesh bed compensation. I have redefined the heatmap and enabled compensation but it doesnt look like it is doing any compensation.

    Any ideas as to what might be going on?


  • Moderator

    @psyfor send M122 during first layer of print to check compensation is enabled.

    Ian


Log in to reply