Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Mesh Bed Compensation Not Working

    Scheduled Pinned Locked Moved
    General Discussion
    2
    2
    120
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • psyforundefined
      psyfor
      last edited by

      I recently updated to Firmware 3.0 and swapped by bed out on the railcore. Everything is working properly except for mesh bed compensation. I have running a 4 point leveling and mesh compensation. Bed is slightly tilted in one spot which used to be able to be corrected by enabling mesh bed compensation. I have redefined the heatmap and enabled compensation but it doesnt look like it is doing any compensation.

      Any ideas as to what might be going on?

      droftartsundefined 1 Reply Last reply Reply Quote 0
      • droftartsundefined
        droftarts administrators @psyfor
        last edited by

        @psyfor send M122 during first layer of print to check compensation is enabled.

        Ian

        TronXY X5S with Duet 3 MB6HC and Roto toolboard : Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : Polargraph with Duet 2 WiFi

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA