Configurator for Duet 3
Weevil last edited by
My rig is using Duet 3, a stepper for X, one for Y and 3 for the Z-axis. Although I did choose Duet 3 in the option for the configurator it will not let me set 3 steppers for the Z-axis. It just assumes I am adding more extruders. Suggestions?
@Weevil There’s no multi-motor mapping in the config tool, yet. You’ll need to add the extra motors manually to your config.g.
bearer last edited by
I suspect thats because the configurator is made to give you a convenient starting point to customize your setup.
And with the infinite flexibility of the firmware its not feasible to support all setups.
Danal last edited by