Configurator for Duet 3

[Weevil]

My rig is using Duet 3, a stepper for X, one for Y and 3 for the Z-axis. Although I did choose Duet 3 in the option for the configurator it will not let me set 3 steppers for the Z-axis. It just assumes I am adding more extruders. Suggestions?

[droftarts]

@Weevil There’s no multi-motor mapping in the config tool, yet. You’ll need to add the extra motors manually to your config.g.

Ian

[A Former User]

I suspect thats because the configurator is made to give you a convenient starting point to customize your setup.

And with the infinite flexibility of the firmware its not feasible to support all setups.

https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors
https://duet3d.dozuki.com/Wiki/Gcode#Section_M584_Set_drive_mapping
https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview#Section_M584

might help?

[Danal]

Here is a working 3-motor on Z, for auto leveling, config.g and bed.g

config (1).g
bed (1).g