Duet 3 static IP
-
Is it possible to set the static IP with Duet 3?
I tried with Putty adding in "sudo nano /etc/dhcpcd.conf"interface wlan0
static ip_address = 192.168.1.40 / 24
static routers = 192.168.1.255
static domain_name_servers = 192.168.1.255but it does not allow me to perform the SBC updates.
Is there an alternative route? -
Most setups use the DHCP server in their wireless router to achieve a static IP. You set up a reservation on the router for the mac id of the duet and anytime the duet asks for a renewed ip number it gets the same ip number assigned.
-
@Marco-Bona said in Duet 3 static IP:
but it does not allow me to perform the SBC updates.
Pretty sure your router and name server are wrong for a /24 network.
-
@bearer ,You're right, the values should be wrong, just to verify how do I recover the correct values?
-
They should be in your router, or if you revert to dhcp you can see what it provides, or even your computer should have matching settings presumably?
Or you could try 192.168.1.1 and if that doesn't work then try 192.168.1.254 as it would be the common addresses to use.
-
@bearer ,Now it works perfectly, thanks a lot for the explanation
