setting Duet 3 to access point
meistron last edited by
I got the duet 3 a week ago and I am trying since that time to set it as an access point but no success.
I got connection to the duet through USB. when I sent the command M589 S"name" P"password" I10.10.10.10 I got no response.
wifi is disabled (M552 S0) . the firmware 3.0 stable is installed. I updated the duet with the DWC through a SBC (RPi) connected to the network. I am using both YAT and Pronterface .
Any help? thank you in advance,
bearer last edited by
Duet 3 doesn't have wifi, and to get access point functionality with the rPi you need to configure the rPi with hostapd.