thermistor + RepRapFirmware 3

[dombee]

Hello

How i can set my thermistor with RRF3?

Fabrican say:

Heater and thermistor section
;*** If you have a Duet board with 1K thermistor series resistors, change R4700 to R1000 to the following M305 commands
M305 P1 R4700 H0 L0
M305 P1 T98640 B4632.86 C9.4861662E-08 R4700 H0 L0

But RRF3 don't use M305

Thanks

[Phaedrux]

https://duet3d.dozuki.com/Wiki/Gcode#Section_M308_Set_or_report_sensor_parameters