Unexplained slowdown in upload speeds
core3d.tech last edited by core3d.tech
This has come up before but I've never seen a satisfying solution to this. For a long time I was uploading my files at 600Kibs plus speeds. I took my Printer to a faire and when I hooked it up again (after MRRF was canceled). my upload speeds went down to 40Kibs again. I've tried different routers in different locations (NetGear and Asus). I've tried changing channels with no results.
M122 P104 S200 gives me 2Mbytes/sec so the SD card isn't the problem either. Has anything else come up since all the previous upload issue posts have been idled? Thx
Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 2.04RC1 (2019-07-14b1)
WiFi Server Version: 1.23
Web Interface Version: 1.22.5
@core3d-tech All I can suggest is try updating firmware to 2.05.1, the latest in RRF 2 branch. There were a lot of fixes for network issues between 2.04 and current. I can't imagine why it would change just by unplugging and plugging it back in again.
core3d.tech last edited by
At the faire I would have had it switch to wifi hotspot and at home it would have gone back to connecting to my home wifi, so it was more than on/off (if that's a clue)
I might try upgrading that but it'd be another band-aid. This problem has been popping up for years now and, like with me, the last time "it just went away" and was no longer pursued but it keeps re-occurring. That's the part that makes it frustrating.