[HELP] How to use DueUI without a Duet using chrome

gtj0

Anything on the left side of an "=" or ":" inside "dueui_content", including "dueui_content" itself, is fixed because that's how the Javascript code finds it.

Same for "status_map". Those key names are what the Duet firmware sends for statuses.

Dario02

@gtj0 You asked me to report you what examples don't work. For now I found:
https://github.com/gtjoseph/DueUI/wiki/File-List
https://github.com/gtjoseph/DueUI/wiki/Heater

gtj0

@Dario02 When you say "'don't work" what do you mean? Can you share the JSON you used to configure them?

Dario02

@gtj0 simply if I add one of them the code doesn't run

Dario02

@gtj0 try adding one of them, now I can't

class DueUIConfig {
  "dueui_content" = {
    "id": "dueui",
    "type": "tabbed_panel",
    "header_panel": {
      "id": "dueui_header_main",
      "type": "panel",

      "element_configs": [
        {
          "id": "video_html",
          "type": "image",
          "src": "http://192.168.1.118/rr_download?name=/images/logo.png",
          "style": {
            "width": "128px",
            "height": "41px"
          },
          "position": {
            "my": "left top",
            "at": "left top",
            "of": "#dueui"
          }
        },
        {
          "id": "status",
          "type": "status",
          "style": {
            "width": "128px"
          },
          "position": {
            "my": "left top",
            "at": "right-115 top+3",
            "of": "#dueui"
          }
        }
      ]
    },
    "menubar": {
      "id": "dueui_menubar",
      "type": "panel",
      "button_defaults": {},
      "position": {
        "my": "left top",
        "at": "left+8 bottom-28",
        "of": "#dueui"
      }
    },
    "element_configs": [
      {
        "id": "dueui_panel_movement",
        "type": "tab_panel",
        "menubar_label": "HOME",
        "element_configs": [
          {
            "id": "video_html",
            "type": "image",
            "src": "http://duet3:8080/stream",
            "style": {
              "width": "320px",
              "height": "210px"
            },
            "position": {
              "my": "left top",
              "at": "left top",
              "of": "#dueui_panel_movement"
            }
          }
          
        ]
      }
    ]
  };

  "status_map" = {
    "idle": { "label": "Idle", "classes": "btn-success" },
    "P": { "label": "Printing", "classes": "btn-success" },
    "S": { "label": "Stopped", "classes": "btn-warning" },
    "C": { "label": "Starting Up", "classes": "btn-success" },
    "paused": { "label": "Paused", "classes": "btn-primary" },
    "pausing": { "label": "Pausing", "classes": "btn-success" },
    "resuming": { "label": "Resuming", "classes": "btn-success" },
    "changingTool": { "label": "Tool<br>Change", "classes": "btn-warning" },
    "busy": { "label": "Busy", "classes": "btn-success" },
    "updating": { "label": "Updating", "classes": "btn-danger" },
    "halted": { "label": "Halted", "classes": "btn-danger" },
    "off": { "label": "Off", "classes": "btn-danger" },
    "processing": { "label": "Processing", "classes": "btn-warning" },
    "simulating": { "label": "Simulating", "classes": "btn-primary" },
    "connected": { "label": "Connected", "classes": "btn-success" },
    "connecting": { "label": "Connecting", "classes": "btn-warning" },
    "reconnected": { "label": "Connected", "classes": "btn-success" },
    "disconnected": { "label": "Disconnected", "classes": "btn-warning" },
    "retrying": { "label": "Retrying", "classes": "btn-warning" },
    "failed": { "label": "Failed", "classes": "btn-danger" },
    "unknown": { "label": "?", "classes": "btn-secondary" }
  };
}

gtj0

@Dario02 I'm sorry but I don't understand. The json you posted seems to work fine but doesn't have either a file list or a heater in it to test.

Dario02

@gtj0 Yes it works fine because I removed what didn't work... as I told you try adding one of the element/widget that I reported you and the code should not work properly. If you can't understand what I mean, please wait until I'll be free to work on this with you ^_^

gtj0

@Dario02 OK, when you get a chance, I'll need you to send me the exact json configuration you tried that didn't work.

Dario02

@gtj0 I managed one error you didn't write the "," after "standby": "G10 P0 S${value}"
} <---- missing ","

"set_temp_commands": {
				"active": "G10 P0 R${value}",
				"standby": "G10 P0 S${value}"
			}
                         /*
			 * The two input fields for setting the active and standby can be hidden
			 * if desired.  The default is to show them.
			 */
			 "show_set_fields": false

it should be:

"set_temp_commands": {
				"active": "G10 P0 R${value}",
				"standby": "G10 P0 S${value}"
			},
                         /*
			 * The two input fields for setting the active and standby can be hidden
			 * if desired.  The default is to show them.
			 */
			 "show_set_fields": false

gtj0

@Dario02 Ah, yeah that's an issue. I'll fix that. Also I think I reversed the "R" and "S" parameters. "active" should be "S" and standby should be "R". I'll fix that as well.

Dario02

@gtj0 ok well, I'll let you know for the other error