Need help calibrating my printer

[HuitZiloP]

So I'm completing my Hypercube Evolution build and it works, but the print quality, of course, is not there yet. I know I need to calibrate, but I don't know what to look for. Can anyone help me determine what needs to be changed?

Here are some pics of my first print:

I am using Inland PLA from microcenter. No idea what I need to change to improve. Can I please have some guidance? Thanks!

[Phaedrux]

https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+4:+Calibration/40

https://forum.duet3d.com/topic/14250/tuning-jerk-accel-speed-settings/2?_=1587944805360

That might get you sorted.