3.01-RC12 (2020-05-06b1) DWC 2.1.7 wrong values Temperature MCU



  • Hello again....

    After instaling with now issue the last version of firmware and the DWC
    i have this showing:

    2020-05-10.png

    The temperature of MCU is around 48ºC and when i put the mouse on top only shows maximum of 28ºC ...

    Not normal... I think...

    Regards



  • I just noticed the same issue with RC12 and DWC 2.1.7 on a duet Maestro.
    I am currently showing 41.9 degrees but hovering over the value I see a minimum of 19.8 and a maximum of 24.9.


Log in to reply