Error: Could not seek from end of file 3.1.1
prodrone last edited by Phaedrux
Hi i get this error:
Error: Could not seek from end of file "1:/dipolvee/dipol/ipex/50xup.down.ipex.v4.gcode"
I didn't find eny info about it
A Former User last edited by
sounds like a filesystem issue; I'd format the card (with the sd card formatter, not quick format) and try again with a fresh file to rule out issues with the filesystem or card.
prodrone last edited by
This card was working fine till i updated to 3.1.1
Tried now what you said and formated second card by SD formatter.
Copied files to new card and same situation.
Can you send M122 and reply with the result?
M1sterd last edited by
Was this resolved? I am also running 3.1.1 and printing from the SD Card on the PanelDue.
I only seem to get the error if the gcode being printed is > 30MB