Error: Could not seek from end of file 3.1.1
-
Hi i get this error:
Error: Could not seek from end of file "1:/dipolvee/dipol/ipex/50xup.down.ipex.v4.gcode"
I didn't find eny info about it
-
sounds like a filesystem issue; I'd format the card (with the sd card formatter, not quick format) and try again with a fresh file to rule out issues with the filesystem or card.
-
This card was working fine till i updated to 3.1.1
Tried now what you said and formated second card by SD formatter.
Copied files to new card and same situation. -
Can you send M122 and reply with the result?
-
Hi,
Was this resolved? I am also running 3.1.1 and printing from the SD Card on the PanelDue.
I only seem to get the error if the gcode being printed is > 30MB
