Just a little lost re: upgrading to 3.0 firmware.
-
Have you tried using the same M307 H0 command for RRF 3.1.1 that you used for RRF 2.05? The values shouldn't have changed significantly.
-
Trying now!
-
It's telling me that it's heating slower than expected... Trying my 2.5 variables now.
-
Well, son of a gun! The 2.5 variables work...
I wonder why the pid tune numbers are so different?
Is there any particular Pid tune regimen you recommend?
Preheat heaters? Nozzle to the bed? fans full on?
I try to do it with the "real world" environment it will be printing in. (e.g. fans on) is that the wrong train of thought?
-
@Steve-Lynch said in Just a little lost re: upgrading to 3.0 firmware.:
I try to do it with the "real world" environment it will be printing in. (e.g. fans on) is that the wrong train of thought?
That's how I do it too. Not sure why the values would be so different.
What are your 2.5 values?
-
Let's Mark this Bad Boy Solved!
-
old values, and new values posted above.
