M203 Units

  • Hi,

    Using Duet WiFi Firmware 2.05.1 Wifi Server 1.23 DWC 2.0.7

    Why does M203 alone return the current values in units different from what you use when setting the values?



  • administrators

    For historical reasons the values passed in the M203 command are passed in mm/min (same as the G1 F parameter). However, most 3D printer users find it more natural to think in mm/sec. That's why I changed M203 to report mm/sec. I would be happy to change it back of users prefer that.

Log in to reply