Duet 2 wifi on an ender 5 pro screen not working
-
Hey guys, just got my duet 2 wifi running 3.1.1 on my ender 5 pro, i cant seem to get the screen to work, is that normal? thanks.
-
What screen are you talking about?
-
gonna take a wild guess
if you connect a PanelDue to this port you must use the following command in config.g to enable it: M575 P1 S1 B57600.
https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md#reprapfirmware-310
-
sorry fellas, had to take the kid to softball practice. Im refering to the factory screen that comes with the ender 5 pro.
-
This guy?
Unfortunately the Duet Wifi doesn't support 12864 screens out of the box. The Duet Maestro does, but the wifi/ethernet lacks the hardware.
Unless of course you wanna try something like this:
https://forum.duet3d.com/topic/15611/logic-level-shifter-for-12864-display-on-duet-2-wifi
Otherwise for a screen on the wifi you'd either need a PanelDue, or a spare tablet to run the web interface on.
