Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet Maestro leds flash

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    2
    75
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • JonasBaleineundefined
      JonasBaleine
      last edited by

      Hi all,

      I have a Duet 2 Maestro v1.0 board and a 24V power supply.

      I believe (it happend quite fast) I may have shorted the fan pins on the board.
      I was lazy and I disconnected a fan from its extension wires while the duet was still turned on.
      Then, all the leds on the board started flashing, every second or so, so I turned off the power supply.

      Now, when I turn on the power supply again, the leds flash in the same way.
      I do not know how to proceed from here and would like your help in order to keep the problem from getting any worse, if there is a solution of course.

      Thanks.

      1 Reply Last reply Reply Quote 0
      • A Former User?
        A Former User
        last edited by

        sounds like something is shorted and the power supply is triggering its short circuit / overload protection?

        anyways, disconnect stuff to see if the fault is external to the board and follow https://duet3d.dozuki.com/Wiki/What_to_do_if_your_Duet_won't_respond to see if you can get the board to work.

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA