Duet 3 - Invert Reset Pins

[Gerrard]

I'm installing a latching e-stop on my machine, and I've plugged it into the two reset pins, but it turns out the operation is inverted - the contacts of the switch are NC, but the board needs NO... Is there a configurable way to invert the board, so it accepts NC?

Cheers

[Phaedrux]

You can invert the pin by prefixing the pin name in M950 with an !.

https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview#Section_Pin_names

[Gerrard]

What's the pin name for the reset pins? I can't see it listed here:
https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview#Section_Pin_names_for_Duet_Num_3

Any suggestions?

[A Former User]

@Gerrard said in Duet 3 - Invert Reset Pins:

What's the pin name for the reset pins?

Doesn't have one, its a hardware reset pin directly to the microcontroller.