Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Weird bed leveling issue

    Scheduled Pinned Locked Moved
    General Discussion
    1
    2
    116
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • paulcdbundefined
      paulcdb
      last edited by

      I have a HEVO and setup independent z axis which seemed to be working ok until I updated the firmware which screwed up a lot of the settings due to some changes and I have it mostly working again except the z 'error' keeps increasing when I home.

      G28
      Error: Some computed corrections exceed configured limit of 2.50mm: -43.270 -42.905

      G28
      Error: Some computed corrections exceed configured limit of 2.50mm: -49.359 -48.986

      G28
      Error: Some computed corrections exceed configured limit of 2.50mm: -55.497 -55.167

      G28
      Error: Some computed corrections exceed configured limit of 2.50mm: -66.454 -66.181

      these are one after another and it seems to be constantly adding some stored value. Is there something I need to add to reset whatever is going on?

      I've been through each file and can't see anything that's being added and they all have 8/8 for last modified so it seems to store it somewhere besides the config files.

      1 Reply Last reply Reply Quote 0
      • paulcdbundefined
        paulcdb
        last edited by

        oooooh....

        It's G30 instead of G28 for homing Z I guess.

        Spent a week scratching my head... my brain's slow! 😞

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA