I thought the printer community might enjoy my firmware typo / mistake
-
Realized I typed 1000 when I meant to type 10000:
M203 X1000 Y1000 Z1000 E2000; Maximum speeds (mm/min)
This is why my print is taking 8 hours instead of 3…
-
With those low speeds, you should get a high quality print!
-
It's almost soothing watching it slowly drift back and forth almost silently. I've been getting some nice prints already lately, the Duet is definitely my go to board now for printer builds. I took the NEMA dampers off the frame and it's still remarkably quiet.
-
Cool typo, you know you can just send M203 X10000 Y10000 Z10000 E2000 mid print?
-
the Duet is definitely my go to board now for printer builds.
I'm with you there.
My long term goal is to install Diamond 5 color hotends - as part of that process I just added Duex5 boards to my printers.
I have another printer kit on order (larger non-delta) and I already have the Duet boards in house ready to go.
Great stuff.
Frederick
