FormBOT TREX v2.0 2017 Model

  • FormBOT TREX v2.0 2017 Model
    Marlin 1.2?

    I’m looking to gut my Printer and rewire to a Duet.

    I’m a bit nervous about planning this.

    What steps/research should I do first?

    • Which Duet
    • Which Screen
    • Casing
    • What wire gauge
    • What connectors
    • PSU hookup considerations

    Though I am a competent maker and coder/scripter I Hate electrics!, sorry.

    Ideally, if you have done the same with a TREX or even RAPTOR I’d welcome your help.

    Thanks All 🙂


  • Moderator

    You can get a lot of info in the documentation wiki.