Guide to (mostly manual) build plate levelling



  • I'm putting this in the "Tuning and Tweaking" section because it is related to "tweaking" but isn't specific to Duet hardware or software in any way, so moderators feel free to move or delete it as you see fit.

    I've just put a video on my YouTube channel about how to level a build plate and how to check and correct any frame inaccuracies, such that the build plate is not only level but also "tram" with the XY rails. Experienced users may not find anything of interest but it might help "newbies". It is primarily about how to do it manually but contains some information that those using multiple motors and automatic levelling might find useful.

    https://www.youtube.com/watch?v=H9O1r46Izn8


Log in to reply