Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    DUET2 Ethernet | Y-Axis movement --> Timeout Webserver

    Scheduled Pinned Locked Moved
    Duet Web Control
    3
    11
    264
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Egrisundefined
      Egris
      last edited by

      Hi,

      i have updated my Duet2 Ethernet to Firmware V3.
      I ran into a Problem that long travel on Y-Axis causing the webserver to fail.
      I cant connect back.

      On the otherhand, X-Axis movment is no Problem..

      Anyone else having this Problem?
      No clue what to do.. Webserver is crashing each time a long Y-Travel going on...

      greetings

      Vetiundefined 1 Reply Last reply Reply Quote 0
      • Vetiundefined
        Veti @Egris
        last edited by

        @Egris said in DUET2 Ethernet | Y-Axis movement --> Timeout Webserver:

        V3.

        did you update to 3.1.1?
        did you update the wifi firmware as well?

        1 Reply Last reply Reply Quote 0
        • Egrisundefined
          Egris
          last edited by

          HI, yeah updated to 3.1.1.
          Duet 2 Ethernet needs wifi firmware?

          Vetiundefined 1 Reply Last reply Reply Quote 0
          • Vetiundefined
            Veti @Egris
            last edited by

            @Egris said in DUET2 Ethernet | Y-Axis movement --> Timeout Webserver:

            Duet 2 Ethernet needs wifi firmware?

            no my bad

            by crashing you mean you can not connect to the webserver anymore?

            do you have a paneldue?

            1 Reply Last reply Reply Quote 0
            • Egrisundefined
              Egris
              last edited by

              yes, cant connect back. I have no Panel due. For the ongoing print there is no drawback.

              1 Reply Last reply Reply Quote 0
              • Vetiundefined
                Veti
                last edited by

                what browser are you using?

                is usb connected?

                1 Reply Last reply Reply Quote 0
                • Egrisundefined
                  Egris
                  last edited by

                  tryed Edge and Firefox, no diffrence. USB is not connected at the moment

                  1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator
                    last edited by

                    Can you please post your config.g and homing files as well as the output of M122 and M98 P"config.g".

                    How are you commanding the long Y axis move? How long?

                    What do you mean by the webserver failing or crashing? what exactly is happening?

                    Z-Bot CoreXY Build | Thingiverse Profile

                    1 Reply Last reply Reply Quote 0
                    • Egrisundefined
                      Egris
                      last edited by

                      Here is the config File.
                      When I do a Y-Axis Move "100mm" via Move-Botton on Web-Control the Webserver timed out and i cant reconnect. Only after a powercycle i can connect back.
                      When i move the X-Axis via the Buttons there is no problem..

                      Started a print, Can post the other informations tomorrow.

                      Best regards

                      config.g

                      1 Reply Last reply Reply Quote 0
                      • Phaedruxundefined
                        Phaedrux Moderator
                        last edited by Phaedrux

                        And homing works normally?

                        In addition to the other info requested, what version of DWC is installed?

                        If you send G91 G1 Y100 from the console does it have the same effect?

                        Z-Bot CoreXY Build | Thingiverse Profile

                        1 Reply Last reply Reply Quote 0
                        • Egrisundefined
                          Egris
                          last edited by

                          First of all thank you for all of your help.
                          Finally I found my problem what is causing the webserver to stop working when y-axis is moved by firmware or manually pushed.. :D.

                          The wires of the Y-Axis Stepper where to close to my Ethernet-Cable.
                          Worked perfectly for 2 years until now..

                          electro magnetic disorder

                          1 Reply Last reply Reply Quote 1
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA