Moisture sensor / Hygrometer

[A Former User]

Hi,
has anybody successfully attached a hygrometer to any duet board? I am thinking about this to have a moisture-sensor/hygrometer go to the filamentbox to throw a warning if there is too high humidity for a certain material. The max level (threshold) what is too high could be individually stored in the "filaments" on the duet. Though that would mean you cannot just post any g-code file from a third party slicer but also have to make sure the same filament is selected on the duet...
Any ideas?
Lucas

[dc42]

Duet/RRF supports the DHT temperature and humidity sensor.

[A Former User]

@dc42
First - thanks for answering so fast!
Great!
Searching the forum for "DHT" or "DHT11"/"DHT22" did the job!

Solved - thanks!