Using onboard Motor drivers for a 3.3v 3A Stepper motor
-
I have a question on the onboard stepper motor drivers can they run a 3.3V 3A Stepper motor or how would i have to use a separate motor driver for this stepper
-
what duet?
can you post the type name of the motor.
-
Any duet I haven’t bought the board u
Yet looking at the duet 2 wifi with an expansion board and here is the stepper specs
3V 3A 200S/R 200C/T
TS3643N16
Made in Japan
They are on a SMC rail system Moler number E-MY2H25-600APL
Thanks -
see
https://duet3d.dozuki.com/Wiki/Using_external_stepper_motor_driversthe duet 3 external stepper board has just been released
https://duet3d.dozuki.com/Wiki/Duet_3_Expansion_1XD
i cant find the datasheet for the motors.
do they come with a stepper driver?
are the bipolar?