Timelapses, are they possible?

Veti

@the_dragonlord said in Timelapses, are they possible?:

But I can't undesrstand how the command M118 P4 S"LAYER CHANGE" ; take a picture could trigger the shooting of a pic....where do I have to put the URL given? In the web control? I am missing something...

the python script enables a telnet connection to the duet and listens for the "LAYER CHANGE" info
the webcam url is an option for the python script

resam

I'm the author of https://github.com/kriechi/DuetRRF-timelapse - Ask me Anything

Generating timelapse videos is quiet an opinionated topic in 3D-printing - everybody has a slightly different setup and preferred way of doing it. This is how I currently run my printer setup:

There are two things needed to make print-synced timelapses:

your slicer needs to insert the M118 commands on every layer change
your raspberry pi needs to run the timelapse.py script

You need to enable Telnet support in your Duet board with M586 P2 S1.
You can start the timelapse script on your RaspberryPi like this:
./timelapse.py some-folder-for-all-images/ 192.168.1.42 http://127.0.0.1:8080/?action=snapshot
(with the IP address of the Duet printer, and the URL is in my case mjpg-streamer returning a single jpg image)

A Former User

@resam said in Timelapses, are they possible?:

I'm the author of https://github.com/kriechi/DuetRRF-timelapse - Ask me Anything

Generating timelapse videos is quiet an opinionated topic in 3D-printing - everybody has a slightly different setup and preferred way of doing it. This is how I currently run my printer setup:

There are two things needed to make print-synced timelapses:

your slicer needs to insert the M118 commands on every layer change

your raspberry pi needs to run the timelapse.py script

You need to enable Telnet support in your Duet board with M586 P2 S1.
You can start the timelapse script on your RaspberryPi like this:
./timelapse.py some-folder-for-all-images/ 192.168.1.42 http://127.0.0.1:8080/?action=snapshot
(with the IP address of the Duet printer, and the URL is in my case mjpg-streamer returning a single jpg image)

ok, now the fog starts to raise a little....so, in order:

I can keep motion eye on my Raspy and install Python 3 and then copy timelapse.py on the Raspy SD
I have to insert the M118 in the layer change as you wrote on github:
M400 ; wait for all movement to complete
M118 P4 S"LAYER CHANGE" ; take a picture
G4 P500 ; wait a bit
does this work on IdeaMaker too (I think so)
Do I have to execute manually each time the launch of the script and the timelapse rendering? Isn't it possible to execute them automatically in some way?
Least and last I didn't understand where the final timelapse MP4 will be stored...

Thanks for your help

resam

I'm not familiar with motioneye - if you find a URL that you can call and it returns a single still frame as jpg or png, then yes.
I'm not familiar with IdeaMaker - most slicers have some "on layer change" script section were you can enter a few g-code commands
with a bit of Linux knowledge it should be easy to do - with varying levels of complexity. I would recommend searching the web for "crontab" or "systemd" in this context
All the still frames and the final rendered movie will be in the folder path you passed to the timelapse script as first argument

A Former User

@resam said in Timelapses, are they possible?:

I'm not familiar with motioneye - if you find a URL that you can call and it returns a single still frame as jpg or png, then yes.

I'm not familiar with IdeaMaker - most slicers have some "on layer change" script section were you can enter a few g-code commands

with a bit of Linux knowledge it should be easy to do - with varying levels of complexity. I would recommend searching the web for "crontab" or "systemd" in this context

All the still frames and the final rendered movie will be in the folder path you passed to the timelapse script as first argument

ok, thanks! I'll do some searching and testing!

A Former User

@resam said in Timelapses, are they possible?:

I'm not familiar with motioneye - if you find a URL that you can call and it returns a single still frame as jpg or png, then yes.

I'm not familiar with IdeaMaker - most slicers have some "on layer change" script section were you can enter a few g-code commands

with a bit of Linux knowledge it should be easy to do - with varying levels of complexity. I would recommend searching the web for "crontab" or "systemd" in this context

All the still frames and the final rendered movie will be in the folder path you passed to the timelapse script as first argument

Hi, I've installed everything but it doesn't work (of course I've missed something).

If can help when the I connect with putty I get this error message:

this is what I've inserted in etc/profile:
sudo python /home/pi/timelapse.py timelapses/ 192.168.1.7 http://192.1.168.13:8080/?action=snapshot

resam

try with sudo python3 ....

python is the old version - python3 is the new one (which you need).

A Former User

This post is deleted!

resam

go and run: python -V and then python3 -V

You will probably see that the first one returns 2.7.something and the other one 3.something.else.
We need 3.something for the timelapse script to work.

You can also avoid this monkey dance by simply calling the timelapse script itself:
sudo /home/pi/timelapse.py timelapses/ 192.168.1.7 http://192.1.168.13:8080/?action=snapshot

A Former User

@resam said in Timelapses, are they possible?:

go and run: python -V and then python3 -V

You will probably see that the first one returns 2.7.something and the other one 3.something.else.
We need 3.something for the timelapse script to work.

You can also avoid this monkey dance by simply calling the timelapse script itself:
sudo /home/pi/timelapse.py timelapses/ 192.168.1.7 http://192.1.168.13:8080/?action=snapshot

uh ok....I'm not a Linux expert....I've change from python to python3 and now no error appear logging into....I've started a trial print to see if all works...I'll let you know in few minutes!

A Former User

@resam said in Timelapses, are they possible?:

go and run: python -V and then python3 -V

You will probably see that the first one returns 2.7.something and the other one 3.something.else.
We need 3.something for the timelapse script to work.

You can also avoid this monkey dance by simply calling the timelapse script itself:
sudo /home/pi/timelapse.py timelapses/ 192.168.1.7 http://192.1.168.13:8080/?action=snapshot

it's printing but I don't see images going into the folder as long as layers changes

resam

just start the script in the interactive console (putty) directly. It should print a few log lines so we can see what is happening.

A Former User

@resam said in Timelapses, are they possible?:

just start the script in the interactive console (putty) directly. It should print a few log lines so we can see what is happening.

resam

Did you enable Telnet in your printer config?

A Former User

@resam said in Timelapses, are they possible?:

Did you enable Telnet in your printer config?

yes

resam

ok - that looks right. However it is failing to send commands to the printer...
Does the error message repeat after 15-20 seconds?

A Former User

@resam said in Timelapses, are they possible?:

ok - that looks right. However it is failing to send commands to the printer...
Does the error message repeat after 15-20 seconds?

yes it does

resam

do you have the timelapse python script running multiple times?
reboot the pi and make sure to not start it more than once.
it's probably easier for debugging to remove the autostart and enter the command into putty directly.

A Former User

@resam said in Timelapses, are they possible?:

do you have the timelapse python script running multiple times?
reboot the pi and make sure to not start it more than once.
it's probably easier for debugging to remove the autostart and enter the command into putty directly.

yes you're right it's running twice I'm afraid, once for the autostart and maybe the second when I log in?

resam

if you used /etc/profile or .bashrc, then yes - this will likely cause multiple starts.