Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Newbie: New Install on Ender 5 Plus---Willing to PAY$$$

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    6
    141
    7.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Vetiundefined
      Veti
      last edited by

      that is already looking good. maybe a bit overextrusion or it could be bad quality filament.
      try reducing the flow by 10%

      petg printing is a bit more difficult compared to pla. its not as forgiving.

      1 Reply Last reply Reply Quote 0
      • shattyundefined
        shatty
        last edited by

        I compared it to the first print and it actually looks alot better. The layers are more uniformed and color also. I think have it set at 135 for extrusion. I will drop it down to 130.

        Vetiundefined 1 Reply Last reply Reply Quote 0
        • Vetiundefined
          Veti @shatty
          last edited by

          @shatty said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:

          I think have it set at 135 for extrusion. I will drop it down to 130.

          is that your esteps or percent of flow?

          1 Reply Last reply Reply Quote 0
          • shattyundefined
            shatty
            last edited by

            That is esteps

            1 Reply Last reply Reply Quote 0
            • Vetiundefined
              Veti
              last edited by

              pla does not like to be overextruded, but underextrusion is ok.

              so try 125 if 130 is the default for your extruder.

              1 Reply Last reply Reply Quote 1
              • shattyundefined
                shatty
                last edited by

                PETG @ 230 C. Its the best print yet!. There was a little sting inside the cabin. Thats it! Maybe drop it 5 deg?

                IMG_20201128_031208.jpg IMG_20201128_031229.jpg IMG_20201128_031153.jpg IMG_20201128_031220.jpg IMG_20201128_031146.jpg IMG_20201128_031138.jpg IMG_20201128_031132.jpg

                1 Reply Last reply Reply Quote 0
                • shattyundefined
                  shatty
                  last edited by

                  If u see stuff on the side of the hull, thats cat hair. The cat loves going near the stupid printer

                  1 Reply Last reply Reply Quote 0
                  • Vetiundefined
                    Veti
                    last edited by

                    what happened to the chimney?

                    next thing to set up is pressure advance.
                    https://duet3d.dozuki.com/Wiki/Pressure_advance

                    1 Reply Last reply Reply Quote 0
                    • shattyundefined
                      shatty
                      last edited by

                      Thats a good question LOL. I dunno. I left it running while I was at work

                      Vetiundefined 1 Reply Last reply Reply Quote 0
                      • Vetiundefined
                        Veti @shatty
                        last edited by Veti

                        @shatty said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:

                        Thats a good question LOL.

                        you cat got it?

                        you might want to get some plexiglas covers for the side so your cat does not get near it.

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA