4. Speed related stepper current?

Speed related stepper current?

  • o_lampe

    Hi all,
    forgive me, if that has been asked before.
    Is it possible to have different stepper current settings for G0 and G1 moves?
    The reason I ask is, my CNC mill has lead screws all around and the NEMA23s require much more torque/current when milling. On travel moves the steppers and drivers could cool down a bit.
    3D printers would benefit from higher currents on travel moves.

    0
Log in to reply
 
Unless otherwise noted, all forum content is licensed under CC-BY-SA