SD card
-
I recently purchased a Duet2 ethernet board . I
am having a great deal of trouble sorting the .sys files for the
SD card. The card delivered has test data on it and and directs
you to a RepRap site. This site gives details of what to input
to the SD card but this is quite old and I dont think it is
compatible with the firmware (2.05.1) It should be possible to
downoad the latest info from github but I download a .bin file
that I cannot open on my Windows 10 machine. Any advice and help
would be most welcome. -
use the config tool to generate the appropriate sys files for your printer type.
https://configtool.reprapfirmware.org/ -
@jay_s_uk Thanks for that. I have used it and got a .sys file out of it. I have read somewhere that code S is now used in the latest firmware as a laser switch and now has to be replaced by H. Is this true and do I have to change S whereever it appears?
-
Thats only applicable to RRF3. Shouldn't cause you an issue if running 2.05.1.
The config tool automatically inserts the correct gcode -
Nearly there! Downloaded the files using "Configuration tool 3.1.10". Initially got "insuficient homing" but this was cured with G92 X100 Y100 Z100. Slight problem - on initially homing X it overshot the end stop microswitch but then settle down. Now to connect the heaters and thermistors
