if clause with choice box

medicusdkfz

Hello,

is it possible, to have a textbox in DWC with 2 choices for filament a and b. If you choose filament a, then it shall load the mesh for metal sheet a. When you choose filament b -> mesh formetal sheet b.

Thank you in advance,
Pierre

afaik closest you get is ok/cancel and some trickery with conditional gcode .. or writing a plugin for dwc

if you have free inputs you could perhaps key the sheets and use switches or inductive/capacitve sensors to detect the type of sheet?

jay_s_uk

why not use the filaments part of DWC to load different mesh files?

fcwilt

I would use the filament selection feature of DWC for that.

I have also used dummy fans as text variables (the name) which display in the fan section of DWC. I use macros to set the fan name.

Frederick