Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet2 Wifi connected but no DWC

    Scheduled Pinned Locked Moved
    Duet Web Control
    2
    4
    109
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Simonundefined
      Simon
      last edited by

      Re: Duet 2 WiFi - Web Control Connection Issues

      1 Reply Last reply Reply Quote 0
      • Simonundefined
        Simon
        last edited by

        Hi,
        it would be perfect to get so Help for my little project here:

        Problem:
        New printer set up Tronxy X5SA Pro with Duet2Wifi board. Yesturday i was solving a lot of Problems on my system bed leveling axis movement etc.
        Today i have started the system and the DWC doesent work anymore 😞 . Ihave no Idea what happend over night.

        I found that section while i was troubleshooting my wifi module:

        Also in the M122 Network diagnostics check the WiFi Module Reset Reason. It should be "turned on by main processor". If it is anything else (e.g. "exception"), report the problem on the forum.

        And here i am.

        My Steps so far:
        Wifi Signal strength is ok with -54dB "-30 to -50 are good, -50 to -60 is OK, -60 to -70 is marginal"
        I am able to ping my system via cmd.
        I was getting this error once: duet 2 wifi reported error incomplete write but it never appeared again.
        I was trying to set the wify server up after erasing the whole Duet didn´t work aswell.

        Now i might try to go back to a older version of DWC of something.

        Would be nice if anyone has further ideas.

        jay_s_ukundefined 1 Reply Last reply Reply Quote 0
        • jay_s_ukundefined
          jay_s_uk @Simon
          last edited by

          @Simon could be the sd card.
          I would take a backup of your configs and then change the sd card.
          It's not a DWC issue.

          Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

          1 Reply Last reply Reply Quote 1
          • Simonundefined
            Simon
            last edited by

            @jay_s_uk Thanks for that hint. I shut down the system to get a break and some food. After my breake i turned everything on and it woked after flashing the DuetWiFiServer.bin and firmware again. I was thinking about replacing that cheap china sd card while having the break but wasn´t shure because everithing else was working.

            Thanks for your Answer! I will observe the system after changing to a sundisk sd and give feedback if it happends again, have a nice day.
            🙂

            1 Reply Last reply Reply Quote 1
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA