DWC 3.2 and G29
garyd9 last edited by
Does the newest released DWC (3.2.0) take advantage of the mesh.g support in RRF 3.2?
Specifically, if I use DWC's Dashboard->Compensation+Calibration->"Run Mesh Compensation", is DWC sending a "G29" with no parameters, or is it trying to do some magic behind the scenes with running M557 and then "G29 S0"?
PCR last edited by
Will send G29
So If you have a mesh.g it will run this. If Not a normal M557