Navigation

    Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Duet 3 Mini 5 Signal Levels on External Drivers connector

    Duet Hardware and wiring
    3
    5
    48
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • fcwilt
      fcwilt last edited by fcwilt

      Hi,

      The signal levels on the Duet 3 Mini 5 External Drivers connector - active pull up/pull down or just pull down?

      Thanks.

      Frederick

      Printers: A FT-5 with the 713 upgrade bits. A custom MarkForged style. A small Utilmaker style and a CoreXY from kits. Various hotends. Using Duets (2 and 3) running 3.4.1

      weed2all 1 Reply Last reply Reply Quote 0
      • dc42
        dc42 administrators last edited by dc42

        Those are 3.3V signals with active pullup.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        fcwilt 1 Reply Last reply Reply Quote 1
        • fcwilt
          fcwilt @dc42 last edited by

          @dc42 said in Duet 5 Mini Signal Levels on External Drivers connector:

          Those are 3.3V signals with active pullup.

          Thank you - that is what I needed to know.

          Much appreciated.

          Frederick

          Printers: A FT-5 with the 713 upgrade bits. A custom MarkForged style. A small Utilmaker style and a CoreXY from kits. Various hotends. Using Duets (2 and 3) running 3.4.1

          1 Reply Last reply Reply Quote 0
          • weed2all
            weed2all @fcwilt last edited by

            @fcwilt where's the duet 5?😁😁😁

            https://www.thingiverse.com/weed2all/designs

            fcwilt 1 Reply Last reply Reply Quote 0
            • fcwilt
              fcwilt @weed2all last edited by

              @weed2all said in Duet 5 Mini Signal Levels on External Drivers connector:

              @fcwilt where's the duet 5?😁😁😁

              Sorry- type Duet 3 Mini 5

              Printers: A FT-5 with the 713 upgrade bits. A custom MarkForged style. A small Utilmaker style and a CoreXY from kits. Various hotends. Using Duets (2 and 3) running 3.4.1

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA